|
|
|
|
Pool Heat Pumps in Canada
We have hundreds of
successfully installed pool heat pumps in Canada. For Canada, we use
USA and Canadian pool heat pump manufacturers that have passed our test
for reliability and efficiency. The ones we recommend for Canada have
the best warranties.
Gas is too expensive in Canada
to heat up a pool and solar systems have been disappointing due to
weather conditions.
Heat Siphon is our favorite
pool heat pump brand for Canada due to the long warranty and also that
it heats to lower outside air temperatures without a hot gas defrost
system. We also like Jandy, Solarium, Hayward and TDM Nirvana. If you
are looking for an specific brand that we don't have listed, please
call or write to us for pricing.
Please note:
If you entered our website through this page, the menu on the left will
help you navigate for more heat pump information, or click
here to go to our Index Page.
|
 |
Special Shipping
Offer to our Friends in Canada!
Take advantage of an
incredible delivery offer for a limited time only.
Have your heat pump delivered at your home in Canada with a lift gate
truck that will lower the heater to the ground for you. Broker fees
paid, GST taxes paid, PST taxes paid. 100% insured delivery with no
claims to fill up.
All you have to do is sign and accept your pool heat pump.
Residential Delivery
in Canada.......................................$695.00
Offer expires on
03/12/2010
In Canada we can also ship to a
truck terminal in your city for a lower rate (doesn't include Broker
fees or Taxes) or to the closest USA terminal to you for free. Please
call us to find out more.
|
Below are our
recommendations for Canada. Please click on the logo for more
information on each product:
 |
 |
|
Manufacturer's
Canada Warranty:
2 years labor, 5
years parts, 10 years on the compressor, 10
years on the titanium heat exchanger. |
| |
|
|
|
 |
|
Manufacturer's
Canada Warranty:
2 years parts and labor, 5
years on the compressor and lifetime on the heat
exchanger |
| |
|
|
|
 |
 |
|
Manufacturer's
Canada Warranty:
1 year parts
& labor. Lifetime on the heat exchanger |
| |
|
|
|
 |
 |
|
Manufacturer's
Canada Warranty:
1 year parts. Lifetime
on the heat exchanger |
| |
|
|
|
 |
|
|
Manufacturer's
Canada Warranty:
1 year parts. Lifetime
on the heat exchanger |
| |
|
|
|
 |
 |
|
Manufacturer's
Canada Warranty:
1 year parts
& labor and 5 on the compressor. |
 |
 |
|
Manufacturer's
Canada Warranty:
2 year parts & labor and 5
on the compressor. |
Customer
Testimonial Letters:
| |
| |
 May 2008, BC Canada |
Hi
Jason:
I
wanted to let you know I have received the Heat Siphon and had
it professionally installed last week.
My main hesitation prior to ordering was the
noise it may cause. My experience with house heat pumps was
that they seemed excessively noisy. As you explained
by phone, the Heat Siphon is relatively quiet with
the Scroll compressor. I may not have to put in any
hedges or other sound dampening measures as I had
anticipated. My neighbors have indicated the noise does not
bother them either, so all went according to plan.
The
pump works just as I had imagined. I have a 18X36
sized pool I keep it covered with a solar cover. Air
Temperature when I started up was 60 F and the Pool temp was 66
F at 9 pm on Tuesday. By 9 pm Wed, the pool was 75 F
and air temp was 60 F. By Thursday morning at 7 am the pool
was 79 F .....and by that evening I was looking at 82
F. Over the week-end I only had to run it only
once by the day to maintain the temperature in the low 80s (
weather has gotten much better). It hasn't been below 80 F for
over a week which is the first time in 13 years. We
have been using the pool more in the last week than all of the last 2
years.
Thanks
again for all your help
Peter
seaoter@telus.net
May
2008, Heat Siphon SX5.0, Vancouver Island, BC, Canada
Peter's pictures of his Heat Siphon SX5.0 Installed at his home in BC,
Canada:
 |
Close up of Heat Siphon after
installation. Notice the four patio stones that he used as a base. This
is a simple and inexpensive, but effective base for the heat pump that
avoids the cost and time spent pouring a concrete slab. |
| |
|
 |
View of the heat pump outside of
the pool equipment room. The heat pump needs to be outside to get the
highest efficiency. |
| |
|
 |
View of the
inside of the pool equipment house. Notice the straight pipes and pride
of workmanship. |
|
June
2008, New Brunswick, Canada
|
Guy purchases his heat pump from us in 2005. This is the original email
that we received from him:
Good morning
Marcus,
I received the heat pump yesterday, everything is fine, I'm
going to store it in my garage for the winter and then install it in
the spring. I'll keep you posted on how that goes and maybe
send some pictures as well. Again I thank you very much for
all your help with my order from the selection of the unit to the
delivery. If anyone is looking for a heat pump I'll be sure
to send them your way. This was the first major purchase I
made over the internet from the United States and between my customs
brokers and you the transaction and delivery went flawlessly.
Guy
guy.richard@rogers.com
Heat Siphon HP5.0, New Brunswick, Canada
On June 2008, we received another email from him with
some pictures and an update:
Hello Marcus,
I purchased my heat pump from you a few year ago and finally got some
pictures taken of the pool. I thought I would send
some. We're starting our third season with the pool and the
heater is worth every cent. I started the heat pump and
within 48 hours the water went from the low 60s to 84 degrees,
something my pool guy told me it would take 3 to 4 days.
Anyway just thought I would update you and tell you how pleased we are
with your products and service.
Guy
guy.richard@rogers.com
Want to
read more testimonials? Click here to access our Customer Testimonial
Page
|
