Cart is empty
FREE SHIPPING
AquaCal Geothermal WS10 Pool Heat Pump, Heat and Cool
AquaCal Geothermal Water-Source WS10 Pool Heat Pump
The AquaCal WS10 Geothermal water source pool heat pump works effectively for large pools. This unit was designed to heat your pool with one of the most energy-efficient and widely-available sources of warmth on our planet: geothermal heat beneath the planet’s surface.
The advanced technology and components within this unit makes it a sustainable process to keep your pool warm in cooler seasons. The unit is extremely durable and can withstand most types of unfavorable weather. A digital thermostat and water flow switch control makes this unit simple to operate.
Brand
Brands:
AquaCal Geothermal
Performance
BTU Output, Standard Rating Conditions 80/80/80
:
AHRI Standard Rating Conditions. Air Conditioning, Heating and Refrigeration Institute.
80°F/ 80°F/ 80%
Used as the basis of comparison for performance characteristics.
This institute operates to standardize the testing and performance data for all heat pumps. Seer Ratings and Performance data must be factual, accurate and verified.
229,000 BTU
COP, Standard Rating Conditions 80/80/80:
6.2
Model Specifications
Model:
WaterSource
Application:
- For commercial use only.
Mode:
Heat/Cool
Refrigerant Type:
R-410A
Display Controls:
Digital
Compressor:
Scroll
Electrical Specs
Hertz:
60 Hz
Phase Type
:
Heat pumps are available in single or three phase units.
A Three-Phase or Multi-Phase heat pump has 2 or more speeds with a high and low setting.
A single-phase heat pump has one setting for cooling and heating. Single phase heat pumps cycle air at one speed and may take longer to heat depending on the temperature.
Three Phase
Voltage:
208/230 v
Pool Water Flow
Water Flow Min/Max GPM:
50/60
Physical Specs
Weight (lbs.):
745
Dimensions:
35" x 61" x 40"
Two (2) Years Parts. Five (5) Years compressor. Two (2) Years Labor.
No posts found
