Cart is empty
FREE SHIPPING
DISCONTINUED
AquaCal Geothermal WS03 Pool Heat Pump
AquaCal Geothermal Water-Source WS03 Pool Heat Pump
The AquaCal Geothermal water source pool heat pump is a suitable choice for pools with up to 10,000 gallons. The unit is designed to harness the warmth that is stored beneath the planet’s surface, where temperatures stay consistently warmer. The components maximize durability and operate with a digital interface, which provides a thermostat and water flow switch control. This unit is a great way to warm your pool without significantly raising your energy bill.
Brand
Brands:
AquaCal Geothermal
Performance
BTU Output, Standard Rating Conditions 80/80/80
:
AHRI Standard Rating Conditions. Air Conditioning, Heating and Refrigeration Institute.
80°F/ 80°F/ 80%
Used as the basis of comparison for performance characteristics.
This institute operates to standardize the testing and performance data for all heat pumps. Seer Ratings and Performance data must be factual, accurate and verified.
55,000 BTU
COP, Standard Rating Conditions 80/80/80:
7.4
Model Specifications
Model:
WaterSource
Application:
- ​For commercial use only.​
Mode:
Heat Only
Refrigerant Type:
R-410A
Display Controls:
Digital
Compressor:
Scroll
Heat Exchanger:
Titanium
Electrical Specs
Hertz:
60 Hz
Phase Type
:
Heat pumps are available in single or three phase units.
A Three-Phase or Multi-Phase heat pump has 2 or more speeds with a high and low setting.
A single-phase heat pump has one setting for cooling and heating. Single phase heat pumps cycle air at one speed and may take longer to heat depending on the temperature.
Single Phase
Voltage:
208/230 v
Pool Water Flow
Water Flow Min/Max GPM:
25/70
Physical Specs
Weight (lbs.):
290
Length x Width x Height (in.):
32" x 37" x 32"
Two (2) Years Parts. Five (5) Years compressor. Two (2) Years Labor.
No posts found
