Cart is empty
FREE SHIPPING
Owners of large pools choose the Heat Siphon C 575 HP pool heat pump because of its energy efficiency, ease of use, and reliability. The heat exchanger is made of pure Titanium and is guaranteed to resist even the most extreme corrosion. With a silent scroll compressor, the unit is quieter and more efficient than most large pool heat pumps. The analog temperature control makes it easy to regulate and monitor the 89,000 BTUs available for warming your pool.
Features
- Titanium Heat Exchanger resists harsh chemicals and outdoor environmental corrosion.
- Quiet Scroll Compressor
- Maintenance Free PVC Cabinet
- Easy-To-Program Controls offer simple, straight forward operation of unit
- Quiet - low noise fan design, sound absorbing vacuum-formed plastic cabinet and noise dampening rubber isolation bushings used to mount the compressor, result in a super quiet heat pum
- Analog Control Panel
- Single or Three Phase Unit
- 50hz or 60hz
Analog Control Panel
- Easy to operate controls are simple to understand and operate.
Brand
Brands:
Heat Siphon
Performance
BTU Output, Standard Rating Conditions 80/80/80
:
AHRI Standard Rating Conditions. Air Conditioning, Heating and Refrigeration Institute.
80°F/ 80°F/ 80%
Used as the basis of comparison for performance characteristics.
This institute operates to standardize the testing and performance data for all heat pumps. Seer Ratings and Performance data must be factual, accurate and verified.
127,000 BTU
COP, Standard Rating Conditions 80/80/80:
6.7
BTU Output 80/80/63
:
80°F / 80°F / 63 %
BTU: British thermal unit. A BTU is the measured amount of heat output the unit will produce. The BTU output will vary with the ambient air temperature and humidity levels.
110,000 - 119,000 BTU
COP 80/80/63
:
COP Coefficient of Performance = KW out/KW in; KW in = KW out/ COP.
The higher the number, the less electricity used. The coefficient of performance of a heat pump is the measured ratio of kilowatt usage compared to the kilowatt output. The greatest value a heat pump provides a pool owner is to deliver a warm pool or hot spa at the lowest possible cost of operation.
6.2
Model Specifications
Mode:
Heat Only
Refrigerant Type:
R-410A
Display Controls:
Analog
Thermostat:
Dual - Pool & Spa
Compressor:
Scroll
Heat Exchanger:
Titanium
Max Water Temp:
106°F Max
Electrical Specs
Hertz:
50/60 Hz
Phase Type
:
Heat pumps are available in single or three phase units.
A Three-Phase or Multi-Phase heat pump has 2 or more speeds with a high and low setting.
A single-phase heat pump has one setting for cooling and heating. Single phase heat pumps cycle air at one speed and may take longer to heat depending on the temperature.
Single or Three Phase
Voltage:
220/240
Minimum Circuit Ampacity / Max Breaker:
30/40
Pool Water Flow
Optimal Water Flow GPM:
50 GPM
Water Flow Min/Max GPM:
25/80 GPM
Physical Specs
Dimensions:
36 x 41 x 48
All Heat Siphon Models - Full Term - Parts & Labor Included (Not Pro-Rated)
2 Years Parts and Labor, 5 Years on the compressor and lifetime corrosion-free heat exchanger. The condenser is warranted corrosion-free for the life of the unit.
No posts found
