Cart is empty
FREE SHIPPING
Hydro Royal HR150TA Pool Heat Pump, 136,000 BTU, Heat/Cool
Hydro Royal has manufactured the HR150TA heating and cooling pool heat pump to heat your pool in the winter and cool it down during summer. Ideal for pools with varying ambient temperatures.
Features
- Titanium Turbo Heat Exchanger
- Efficient Scroll Compressor
- Super-Quiet 8 Pole Emerson Fan Motor
- Higher efficiency in colder weather
- Quiet – as low as 56 decibels at full operation
- No-Rust ABS Cabinet
- Digital Diagnostic LCD Display reads in real words
- Super-Sized Evaporator Coil (20 square feet of wrap-around coil)
- Patented Refrigerant Metering System
- 2” Water flow - no need for an external bypass
- Plumbing located out of the way
- Compatible with all remote control systems
- R-410A Refrigerant is environmentally friendly
Brand
Brands:
HydroRoyal
Performance
BTU Output, Standard Rating Conditions 80/80/80
:
AHRI Standard Rating Conditions. Air Conditioning, Heating and Refrigeration Institute.
80°F/ 80°F/ 80%
Used as the basis of comparison for performance characteristics.
This institute operates to standardize the testing and performance data for all heat pumps. Seer Ratings and Performance data must be factual, accurate and verified.
136,000 BTU
COP, Standard Rating Conditions 80/80/80:
6.0
BTU Output 80/80/63
:
120,000 - 129,000 BTU
COP 80/80/63
:
COP Coefficient of Performance = KW out/KW in; KW in = KW out/ COP.
The higher the number, the less electricity used. The coefficient of performance of a heat pump is the measured ratio of kilowatt usage compared to the kilowatt output. The greatest value a heat pump provides a pool owner is to deliver a warm pool or hot spa at the lowest possible cost of operation.
5.4
Model Specifications
Mode:
Heat/Cool
Refrigerant Type:
R-410A
Display Controls:
Digital
Thermostat:
Digital
Compressor:
Scroll
Heat Exchanger:
100% Titanium
Electrical Specs
Phase Type
:
Heat pumps are available in single or three phase units.
A Three-Phase or Multi-Phase heat pump has 2 or more speeds with a high and low setting.
A single-phase heat pump has one setting for cooling and heating. Single phase heat pumps cycle air at one speed and may take longer to heat depending on the temperature.
Single Phase
Minimum Circuit Ampacity / Max Breaker:
37/50
Pool Water Flow
Optimal Water Flow GPM:
45 GPM
Water Flow Min/Max GPM:
20/70 GPM
Physical Specs
Dimensions:
32 x 32 x40
HR Series: (Domestic US installation only) 2 Years Parts, 2 Years
Labor. Year 3 through 10 limited 30% MSRP prorated parts only (No
Labor). The Owner is responsible for all labor charges after year 2.
HI Series: (Florida installation only). 5 years parts, 5 years labor.
Year 6 through 10, limited 30% MSRP prorated parts only (No Labor). The
Owner is responsible for all labor charges after year 5.
No posts found
