Cart is empty
FREE SHIPPING
Raypak R6450ti-E Pool Heat Pump, 119,000 BTU
Raypak R6450ti E- Power Defrost | Specialty Series
The digital interface and power defroster are two perks that the Raypak R6450ti E-PD offers above other units. At 119,000 BTUs, this powerful pool heat pump is perfect for owners of large pools that want to extend their swimming season into cooler weather. It achieves high levels of efficiency with Venturi fan cowling and large air coils to improve air circulation through the unit.
The scroll compressor reduces the noise of its operations, and sound isolation pads cancel out noise transference and improve drainage. The LED diagnostic lights make its functions easier to understand and the unit comes with remote capabilities thanks to its digital interface. The spiral titanium tube heat exchanger is designed to resist all types of corrosion, and the unit is well-protected by its DuraSteel powder-coated cabinet.
Brand
Brands:
Raypak
Performance
BTU Output, Standard Rating Conditions 80/80/80
:
AHRI Standard Rating Conditions. Air Conditioning, Heating and Refrigeration Institute.
80°F/ 80°F/ 80%
Used as the basis of comparison for performance characteristics.
This institute operates to standardize the testing and performance data for all heat pumps. Seer Ratings and Performance data must be factual, accurate and verified.
119,000 BTU
COP, Standard Rating Conditions 80/80/80:
5.9
BTU Output 80/80/63
:
110,000 - 119,000 BTU
COP 80/80/63
:
COP Coefficient of Performance = KW out/KW in; KW in = KW out/ COP.
The higher the number, the less electricity used. The coefficient of performance of a heat pump is the measured ratio of kilowatt usage compared to the kilowatt output. The greatest value a heat pump provides a pool owner is to deliver a warm pool or hot spa at the lowest possible cost of operation.
5.7
Model Specifications
Mode:
Power Defrost
Refrigerant Type:
R-410A
Display Controls:
Digital
Compressor:
Scroll
Heat Exchanger:
Titanium
Electrical Specs
Hertz:
60 Hz
Phase Type
:
Heat pumps are available in single or three phase units.
A Three-Phase or Multi-Phase heat pump has 2 or more speeds with a high and low setting.
A single-phase heat pump has one setting for cooling and heating. Single phase heat pumps cycle air at one speed and may take longer to heat depending on the temperature.
Single Phase
Voltage:
208v - 230v
Minimum Circuit Ampacity / Max Breaker:
42/60
Pool Water Flow
Water Flow Min/Max GPM:
15/60
Physical Specs
Weight (lbs.):
310
Length x Width x Height (in.):
35.75" x 35.75" x 45"
Two (2) years labor, One (1) years parts. The titanium tube component of the titanium heat exchanger is warranted for ten (10) years from the *Effective Date, with no labor coverage in the third through tenth years.
*Effective date: The Effective Date of this Limited Warranty is the date of original installation if properly documented; if you are not able to provide documentary proof of the date of original installation, the Effective Date will be the date of manufacture plus 30 days.
No posts found
