Cart is empty
FREE SHIPPING
Raypak R6450ti-HC Pool Heat Pump, 119,000 BTU, Heat/Cool
Raypak R6450ti E- Heat & Cool | Specialty Series
The Raypak R6450ti E-HC heat-cool unit can add months to your swimming season. The unit’s 115,000 BTUs can be used to heat your pool in cool weather or cool your pool when it gets hotter. With large air coils and Venturi fan cowling, air-flow is maximized to greatly enhance performance. The spiral titanium tube heat exchanger is engineered to resist corrosion from harsh pool chemicals and enhances the unit’s performance with top-ranking heat transfer.
The unit is easy to use, with LED diagnostic lights on its digital interface and remote capabilities for programming. For durability, the cabinet is crafted with DuraSteel powder-coated steel. It runs quietly, thanks to its scroll compressor and sound isolation pads. This heat-cool unit is ideal for large pools.
Brand
Brands:
Raypak
Performance
BTU Output, Standard Rating Conditions 80/80/80
:
AHRI Standard Rating Conditions. Air Conditioning, Heating and Refrigeration Institute.
80°F/ 80°F/ 80%
Used as the basis of comparison for performance characteristics.
This institute operates to standardize the testing and performance data for all heat pumps. Seer Ratings and Performance data must be factual, accurate and verified.
119,000 BTU
COP, Standard Rating Conditions 80/80/80:
5.9
BTU Output 80/80/63
:
110,000 - 119,000 BTU
COP 80/80/63
:
COP Coefficient of Performance = KW out/KW in; KW in = KW out/ COP.
The higher the number, the less electricity used. The coefficient of performance of a heat pump is the measured ratio of kilowatt usage compared to the kilowatt output. The greatest value a heat pump provides a pool owner is to deliver a warm pool or hot spa at the lowest possible cost of operation.
5.7
Model Specifications
Mode:
Heat/Cool
Refrigerant Type:
R-410A
Display Controls:
Digital
Compressor:
Scroll
Heat Exchanger:
Titanium
Electrical Specs
Hertz:
60 Hz
Phase Type
:
Heat pumps are available in single or three phase units.
A Three-Phase or Multi-Phase heat pump has 2 or more speeds with a high and low setting.
A single-phase heat pump has one setting for cooling and heating. Single phase heat pumps cycle air at one speed and may take longer to heat depending on the temperature.
Single Phase
Voltage:
208v - 230v
Minimum Circuit Ampacity / Max Breaker:
42/60
Pool Water Flow
Water Flow Min/Max GPM:
15/60
Physical Specs
Weight (lbs.):
310
Length x Width x Height (in.):
35.75" x 35.75" x 45"
Two (2) years labor, One (1) years parts. The titanium tube component of the titanium heat exchanger is warranted for ten (10) years from the *Effective Date, with no labor coverage in the third through tenth years.
*Effective date: The Effective Date of this Limited Warranty is the date of original installation if properly documented; if you are not able to provide documentary proof of the date of original installation, the Effective Date will be the date of manufacture plus 30 days.
No posts found
