Raypak R8450ti E-HC | Specialty Series
For ease of use and reliability, the Raypak R8450ti E-HC heat-cool unit is one of the best options on the market. It has 139,000 BTUs, making it favorable for large pools. The Venturi fan cowling and large air coils improve air flow, maximizing its performance and efficiency. The scroll compressor technology reduces overall noise, and the sound isolation pads reduce noise transference while improving drainage. The spiral titanium tube heat exchanger is guaranteed to resist corrosion, and combined with the DuraSteel powder-coated cabinet, gives this unit outstanding durability. The digital interface allows for pool owners to heat or cool their pool with remote capability and the LED diagnostic lights allow for simple diagnosis of any problems with the unit.
AHRI Standard Rating Conditions. Air Conditioning, Heating and Refrigeration Institute.
80°F/ 80°F/ 80%
Used as the basis of comparison for performance characteristics.
This institute operates to standardize the testing and performance data for all heat pumps. Seer Ratings and Performance data must be factual, accurate and verified.
80°F / 80°F / 63 %
BTU: British thermal unit. A BTU is the measured amount of heat output the unit will produce. The BTU output will vary with the ambient air temperature and humidity levels.
COP Coefficient of Performance = KW out/KW in; KW in = KW out/ COP.
The higher the number, the less electricity used. The coefficient of performance of a heat pump is the measured ratio of kilowatt usage compared to the kilowatt output. The greatest value a heat pump provides a pool owner is to deliver a warm pool or hot spa at the lowest possible cost of operation.
Heat pumps are available in single or three phase units.
A Three-Phase or Multi-Phase heat pump has 2 or more speeds with a high and low setting.
A single-phase heat pump has one setting for cooling and heating. Single phase heat pumps cycle air at one speed and may take longer to heat depending on the temperature.
Pool Water Flow
Two (2) years labor, Seven (7) years parts with no labor coverage in the third through seventh years. The titanium tube component of the titanium heat exchanger is warranted for ten (10) years from the *Effective Date, with no labor coverage in the third through tenth years.
*Effective date: The Effective Date of this Limited Warranty is the date of original installation if properly documented; if you are not able to provide documentary proof of the date of original installation, the Effective Date will be the date of manufacture plus 30 days.
No posts found