Cart is empty
FREE SHIPPING
Heat Siphon C200HP Pool Heat Pump, 48,000 BTU
Above Ground Pool Heat Pump | Replacement for C200HP
The Heat Siphon C200HP is for small and mid-sized pools, the Heat Siphon C200HP pool heat pump offers a number of benefits. Its most popular features include an easy-to-use analog temperature control, a silent scroll compressor for maximum energy efficiency, a maintenance-free cabinet, and a pure Titanium heat exchanger that is guaranteed to last for the life of your unit. This pool heat pump packs 48,000 BTUs with world-class efficiency, perfect for your backyard pool-warming needs.
Features
- Titanium Heat Exchanger resists harsh chemicals and outdoor environmental corrosion.
- Quiet Scroll Compressor
- Maintenance Free PVC Cabinet
- Easy-To-Program Controls offer simple, straight forward operation of unit
- Quiet - low noise fan design, sound absorbing vacuum-formed plastic cabinet and noise dampening rubber isolation bushings used to mount the compressor, result in a super quiet heat pum
- Analog Control Panel
- Single or Three Phase Unit
- 50hz or 60hz
Analog Control Panel
- Easy to operate controls are simple to understand and operate.
Hertz:
60 Hertz
Phase:
Single Phase
Brand
Brands:
Heat Siphon
Performance
BTU Output, Standard Rating Conditions 80/80/80
:
AHRI Standard Rating Conditions. Air Conditioning, Heating and Refrigeration Institute.
80°F/ 80°F/ 80%
Used as the basis of comparison for performance characteristics.
This institute operates to standardize the testing and performance data for all heat pumps. Seer Ratings and Performance data must be factual, accurate and verified.
48,000 BTU
COP, Standard Rating Conditions 80/80/80:
6.0
BTU Output 80/80/63
:
39,000 - 49,000 BTU
COP 80/80/63
:
COP Coefficient of Performance = KW out/KW in; KW in = KW out/ COP.
The higher the number, the less electricity used. The coefficient of performance of a heat pump is the measured ratio of kilowatt usage compared to the kilowatt output. The greatest value a heat pump provides a pool owner is to deliver a warm pool or hot spa at the lowest possible cost of operation.
5.6
Model Specifications
Mode:
Heat Only
Pool Type:
- Under 10,000 Gallons
- Above Ground
Refrigerant Type:
R-410A
Display Controls:
Analog
Thermostat:
Dual Set-point (pool or spa) thermistor temperature sensor w/ 1°F differential Maximum Set-Point = 98°F in pool mode / 104°F in spa mode
Compressor:
Scroll
Heat Exchanger:
Titanium
Max Water Temp:
106°F Max
Electrical Specs
Hertz:
60 Hz
Phase Type
:
Heat pumps are available in single or three phase units.
A Three-Phase or Multi-Phase heat pump has 2 or more speeds with a high and low setting.
A single-phase heat pump has one setting for cooling and heating. Single phase heat pumps cycle air at one speed and may take longer to heat depending on the temperature.
Single or Three Phase
Voltage:
208/230-1-60
Minimum Circuit Ampacity / Max Breaker:
30
Pool Water Flow
Optimal Water Flow GPM:
50 GPM
Water Flow Min/Max GPM:
25/80 GPM
Physical Specs
Dimensions:
34 x 39 x 36
All Heat Siphon Models - Full Term - Parts & Labor Included (Not Pro-Rated)
2 Years Parts and Labor, 5 Years on the compressor and lifetime corrosion-free heat exchanger. The condenser is warranted corrosion-free for the life of the unit.
No posts found
