Cart is empty
FREE SHIPPING
Heat Siphon Z200HP Pool Heat Pump, 48,000 BTU
Above Ground Pool Heat Pump | Replaces the Z200HP Mode
The Heat Siphon Z200HP offers all the most reliable features of Heat Siphon pool heat pumps with an updated digital temperature control. Perfect for smaller pools, or above ground pools, the HS Z200 HP has 48,000 BTUs and silent scroll compressor technology to maximize your energy efficiency and make the most out of an above-ground pool or other type of small pool. The pure Titanium heat exchanger comes with a lifetime guarantee and the non-metal cabinet requires no maintenance, making it a relatively stress-free product to use and maintain.
Perfect for above ground pools or pools under 10,000 gallons with a solar blanket.
Features
- Titanium Heat Exchanger resists harsh chemicals and outdoor environmental corrosion.
- Quiet Scroll Compressor
- Maintenance Free PVC Cabinet
- Easy-To-Program Controls offer simple, straight forward operation of unit
- Quiet - low noise fan design, sound absorbing vacuum-formed plastic cabinet and noise dampening rubber isolation bushings used to mount the compressor, result in a super quiet heat pump
- Digital Control Panel
- Three Phase Unit
- 60 Hertz
Digital Control Panel
- Easy to operate controls are simple to understand and operate.
Hertz:
60 Hertz
Phase:
Single Phase
Brand
Brands:
Heat Siphon
Performance
BTU Output, Standard Rating Conditions 80/80/80
:
AHRI Standard Rating Conditions. Air Conditioning, Heating and Refrigeration Institute.
80°F/ 80°F/ 80%
Used as the basis of comparison for performance characteristics.
This institute operates to standardize the testing and performance data for all heat pumps. Seer Ratings and Performance data must be factual, accurate and verified.
48,000 BTU
COP, Standard Rating Conditions 80/80/80:
6.0
BTU Output 80/80/63
:
39,000 - 49,000 BTU
COP 80/80/63
:
COP Coefficient of Performance = KW out/KW in; KW in = KW out/ COP.
The higher the number, the less electricity used. The coefficient of performance of a heat pump is the measured ratio of kilowatt usage compared to the kilowatt output. The greatest value a heat pump provides a pool owner is to deliver a warm pool or hot spa at the lowest possible cost of operation.
5.6
Model Specifications
Mode:
Heat Only
Pool Type:
- Under 10,000 Gallons
- Above Ground
Refrigerant Type:
R-410A
Display Controls:
Digital
Thermostat:
Dual - Pool & Spa
Compressor:
Scroll
Heat Exchanger:
Titanium
Max Water Temp:
106°F Max
Electrical Specs
Hertz:
50/60 Hz
Phase Type
:
Heat pumps are available in single or three phase units.
A Three-Phase or Multi-Phase heat pump has 2 or more speeds with a high and low setting.
A single-phase heat pump has one setting for cooling and heating. Single phase heat pumps cycle air at one speed and may take longer to heat depending on the temperature.
Single or Three Phase
Voltage:
220/240
Minimum Circuit Ampacity / Max Breaker:
40
Pool Water Flow
Optimal Water Flow GPM:
50 GPM
Water Flow Min/Max GPM:
25/80 GPM
Physical Specs
Dimensions:
36 x 41 x 38
All Heat Siphon Models - Full Term - Parts & Labor Included (Not Pro-Rated)
2 Years Parts and Labor, 5 Years on the compressor and lifetime corrosion-free heat exchanger. The condenser is warranted corrosion-free for the life of the unit.
No posts found
