Cart is empty
FREE SHIPPING
Jandy JE2000T Pool Heat Pump, 110,000 BTU
1380732636524c4edc55713.jpg "Jandy JE 2000T Pro Series Heat Pump by Zodiac")
1380732636524c4edc55713.jpg.jpg "Jandy JE 2000T Pro Series Heat Pump by Zodiac")
NEW! Pro Series heat pumps by Jandy are the most reliable and cost effective way to heat your pool throughout the season. With maximum amount of heat transfer to your swimming pool, its easy to see that the Pro Series is energy efficient and ecological. JE2000T model is 110,000BTUs and features a pure Titanium heat exchanger, resistant to corrosion from water conditioning and precisely regulates hydraulic flow for the biggest energy savings and allowing lower operating costs to you.
High Performance Components
100% Titanium Heat Exchanger
Versa Plumb® Ready – Provides 50% more hydraulic efficiency.
R410A Refrigerant is clean and efficient
Scroll Compressor reduces noise for quiet operation
Aqualink Automation ready digital controls
Available in Heat and Cool Models
Brand
Brands:
Jandy Zodiac
Performance
BTU Output, Standard Rating Conditions 80/80/80
:
AHRI Standard Rating Conditions. Air Conditioning, Heating and Refrigeration Institute.
80°F/ 80°F/ 80%
Used as the basis of comparison for performance characteristics.
This institute operates to standardize the testing and performance data for all heat pumps. Seer Ratings and Performance data must be factual, accurate and verified.
110,000 BTU
COP, Standard Rating Conditions 80/80/80:
6.0
BTU Output 80/80/63
:
90,000 - 99,000 BTU
COP 80/80/63
:
COP Coefficient of Performance = KW out/KW in; KW in = KW out/ COP.
The higher the number, the less electricity used. The coefficient of performance of a heat pump is the measured ratio of kilowatt usage compared to the kilowatt output. The greatest value a heat pump provides a pool owner is to deliver a warm pool or hot spa at the lowest possible cost of operation.
5.7
Model Specifications
Mode:
Heat Only
Display Controls:
Digital
Compressor:
Scroll
Heat Exchanger:
Titanium
Electrical Specs
Phase Type
:
Heat pumps are available in single or three phase units.
A Three-Phase or Multi-Phase heat pump has 2 or more speeds with a high and low setting.
A single-phase heat pump has one setting for cooling and heating. Single phase heat pumps cycle air at one speed and may take longer to heat depending on the temperature.
Single Phase
Voltage:
230V/60Hz
Minimum Circuit Ampacity / Max Breaker:
40.21/60
Pool Water Flow
Optimal Water Flow GPM:
42 GPM
Water Flow Min/Max GPM:
20/70 GPM
Zodiac heat pumps are warranted for two (2) years. Heat pump compressors and heat exchangers are warranted for five (5) years.
Jandy Pro Series Installation and Operation Manual
Jandy JE Pro Series Heat Pump Anchor Bracket Instructions
Jandy JE Chiller Heat Pump Brochure
Jandy JE Pro 3000T Heat Pump Brochure
Jandy Air Energy Owners Manual
Jandy Air Energy EE1500T Brochure
Jandy Air Energy EE2000T Brochure
No posts found
