NEW! Jandy has produced a premium line of energy efficient pool and spa heaters that are versatile to meet your pool heating needs. JE Pro series heat pumps are equipped with digital controls that are programmable with auto-temp settings so you can maintain the temperature of your pool water automatically throughout the day.
High Performance Components
100% Titanium Heat Exchanger
Versa Plumb® Ready – Provides 50% more hydraulic efficiency.
R410A Refrigerant is clean and efficient
Scroll Compressor reduces noise for quiet operation
Aqualink Automation ready digital controls
Available in Heat and Cool Models
AHRI Standard Rating Conditions. Air Conditioning, Heating and Refrigeration Institute.
80°F/ 80°F/ 80%
Used as the basis of comparison for performance characteristics.
This institute operates to standardize the testing and performance data for all heat pumps. Seer Ratings and Performance data must be factual, accurate and verified.
80°F / 80°F / 63 %
BTU: British thermal unit. A BTU is the measured amount of heat output the unit will produce. The BTU output will vary with the ambient air temperature and humidity levels.
COP Coefficient of Performance = KW out/KW in; KW in = KW out/ COP.
The higher the number, the less electricity used. The coefficient of performance of a heat pump is the measured ratio of kilowatt usage compared to the kilowatt output. The greatest value a heat pump provides a pool owner is to deliver a warm pool or hot spa at the lowest possible cost of operation.
Heat pumps are available in single or three phase units.
A Three-Phase or Multi-Phase heat pump has 2 or more speeds with a high and low setting.
A single-phase heat pump has one setting for cooling and heating. Single phase heat pumps cycle air at one speed and may take longer to heat depending on the temperature.
Pool Water Flow
Zodiac heat pumps are warranted for two (2) years. Heat pump compressors and heat exchangers are warranted for five (5) years.
No posts found